Have you been on the lookout for related information about What Would Cause My Electric Water Heater to Stop Working??
Lots of modern-day houses utilize an electric water heater for their heating system, due to its convenience and also convenience of use. Nonetheless, much like any other electrical appliances, problems may emerge with its use, all of a sudden. It can be actually discouraging to wake up to a cold shower instead of a warm one or having your bathroom with water that isn't warm sufficient and even as well hot. Whatever the case may be, hot water heater troubles can be rather stressful. Fortunately, we've made a checklist of feasible services to your hot water heater concerns. There are a variety of elements that could cause most of these troubles, maybe a problem with the power supply, the electrical burner, or the thermostat. Prior to doing anything, ensure you turn off the major power supply for safety and security. Whatever the issue is, getting it repaired should not posture excessive of an issue if you adhere to these steps:
Check Your Power Supply:
As standard as this might seem, it is really needed. Without appropriate power, your water heater will certainly not work. So the first thing to do when your water all of a sudden retires is to validate that it isn't a power problem. Examine if the fuse is burnt out or the circuit breaker stumbled. If the circuit breaker is the issue, merely turn it on and off once again. Replace any kind of damaged or worn-out fuse. Check the appliance with power after these adjustments to see if it's currently working.
Inspect the Heating Element in the Hot Water Heater:
If it's not a power issue, after that try checking out your burner if it is still working. Examine each of your heating elements to ensure the issue isn't with any one of them. If any of them is faulty, change that part and after that check whether the warm water is back on.
Check Your Thermostat:
If your hot water heater still isn't functioning or the water coming out isn't warm enough, you might need to examine the temperature setups on your upper thermostat. Make sure the circuit breaker is turned off prior to doing anything. Open the accessibility panel as well as press the red switch for temperature reset over the thermostat. This should assist warm the water. Turn the breaker back on and inspect if the trouble has been settled.
Call A Professional:
If after changing all faulty parts and also resetting your temperature, the water heater still isn't functioning, you may need to speak to an expert plumber for an expert point of view. The problem with your heating unit could be that the cold and hot taps have been changed or it might be undersized for the amount of hot water needed in your house. Whatever the case may be, an expert plumber would certainly help fix the trouble.
Conclusion
Water heater issues are not constantly significant. Many of them are because of small concerns like a blown fuse or worn-out heating element. Changing the damaged components should work. Nevertheless, if you are still incapable to solve the problem, give a call to your closest plumber to find to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As a passionate reader about What Would Cause My Electric Water Heater to Stop Working?, I think sharing that piece of writing was a smart idea. Liked our write up? Please share it. Help others find it. Kudos for your time. Come back soon.
Call